Available Properties |
---|
- Specific Gravity, ASTM D792
- Density, ISO 1183
- Density of Compound, ISO 1872-1, Indicative (PE only)
- Water Absorption, ASTM D570, 24hr immersion
- Linear Mold Shrinkage, Flow, ASTM D955
- Linear Mold Shrinkage, Flow, ISO 294-4
- Linear Mold Shrinkage, Transverse, ISO 294-4
- Melt Flow, ASTM D1238
- Melt Flow, ISO 1133
- Hardness, Shore D, ASTM D2240
- Hardness, Shore D, ISO 868, 15 sec
- Tensile Strength at Break, ASTM D638
- Tensile Strength at Break, ISO 527-2/1A, 50mm/min
- Tensile Strength, Yield, ISO 527-2/1A, 50mm/min
- Tensile Stress at Strain, ISO 527-1/2
- Tensile Stress at Strain, ISO 527-1/2
- Tensile Stress at Strain, ISO 727-1/2
- Tensile Stress at Strain, ISO 527-2/1A
- Elongation at Break
- Elongation at Break, ASTM D638
- Elongation at Yield, ISO 527-2/1A, 50mm/min
- Tensile Modulus, ISO 527-2/1A, 50mm/min
- Tensile Modulus, ASTM D638
- Flexural Strength, ISO 178
- Flexural Strength, ISO 178
- Flexural Modulus, ISO 178
- Flexural Modulus, ASTM D790
- Flexural Modulus, ISO 178
- Flexural Modulus, ASTM D790
- Flexural Modulus, ISO 178
- Resilience, ASTM D2632, Bayshore, %
- Resilience, Bayshore, %
- Flex Crack Resistance, Ross flex
- Izod Impact, Notched, ASTM D256
- Izod Impact, Notched, ASTM D256
- Izod Impact, Notched (ISO), ISO 180/1A
- Charpy Impact Unnotched, ISO 179/1eU
- Charpy Impact Unnotched, ISO 179/1eU
- Charpy Impact, Notched, ISO 179/1eA, partial break
- Charpy Impact, Notched, ISO 179/1eA, partial break
- Tear Strength, ISO 34-1
- Tear Strength, ASTM D624
- Tear Strength, ASTM D1004
- Compression Set, ASTM D395
- Volume Resistivity, IEC 60093
- Volume Resistivity, ASTM D257
- Surface Resistance, IEC 60093
- Dielectric Constant, IEC 60250
- Dielectric Strength, ASTM D149, short term
- Dielectric Strength, IEC 60243-1
- Dissipation Factor, IEC 60250
- Comparative Tracking Index, ASTM D3638
- Comparative Tracking Index, IEC 60112
- CTE, linear, Parallel to Flow, ISO 11359-2
- CTE, linear, Transverse to Flow, ISO 11359-2
- Melting Point, ISO 11357-1,-2,-3, 10°C/min
- Melting Point, ASTM D3418
- Deflection Temperature at 0.46 MPa (66 psi), ISO 75-1, -2
- Deflection Temperature at 1.8 MPa (264 psi), ISO 75-1, -2
- Vicat Softening Point, ASTM D1525
- Glass Transition Temp, Tg, ASTM D3418
- Flammability, UL94
- Processing Temperature, cavity
- Processing Temperature, hot runner
- Feed Temperature
- Zone 1
- Zone 2
- Zone 3
- Zone 4
- Die Temperature
- Melt Temperature
- Drying Temperature
- Dry Time
- Moisture Content
- FDA
|
| | |