|
Physical Properties | Original Value | Comments |
---|
Density | 1.32 - 1.90 g/cc |
Filler Content | 10.0 - 60.0 % |
Water Absorption | 0.0200 - 0.500 % |
| 0.150 - 0.150 % @Temperature 80.0 - 80.0 °C |
| 0.150 - 0.150 % @Time 173000 - 173000 sec |
Moisture Absorption at Equilibrium | 0.0300 - 0.500 % |
| 0.180 - 0.220 % @Temperature 70.0 - 70.0 °C |
Water Absorption at Saturation | 0.0400 - 0.400 % |
| 0.350 - 0.500 % @Temperature 100 - 100 °C |
Additive Loading | 10.0 - 40.0 % |
Viscosity | 550 - 850000 cP @Temperature 400 - 420 °C |
| 247 - 920 cP @Temperature 400 - 420 °C |
| 247 - 920 cP @Shear Rate 1000 - 1000 1/s |
Linear Mold Shrinkage | 0.000 - 0.0220 cm/cm |
| 0.00300 - 0.00300 cm/cm @Temperature 180 - 180 °C |
Linear Mold Shrinkage, Transverse | 0.00250 - 0.0170 cm/cm |
| 0.00700 - 0.00700 cm/cm @Temperature 180 - 180 °C |
Melt Flow | 1.10 - 77.0 g/10 min |
Spiral Flow | 6.50 - 38.0 cm |
| 7.50 - 33.0 cm @Temperature 395 - 395 °C |
| 7.50 - 33.0 cm @Thickness 1.00 - 3.00 mm |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell M | 90.0 - 125 |
Hardness, Rockwell R | 118 - 124 |
Hardness, Shore D | 83.0 - 93.0 |
Ball Indentation Hardness | 220 - 440 MPa |
Tensile Strength, Ultimate | 51.7 - 2900 MPa |
| 35.0 - 2826.85 MPa @Temperature -55.0 - 275 °C |
Tensile Strength, Yield | 75.0 - 2070 MPa |
Elongation at Break | 0.300 - 7.00 % |
| 0.860 - 2.50 % @Temperature -55.0 - 177 °C |
Elongation at Yield | 1.20 - 7.00 % |
Modulus of Elasticity | 1.00 - 172 GPa |
| 2.55 - 172 GPa @Temperature -55.0 - 177 °C |
Flexural Yield Strength | 48.3 - 2170 MPa |
| 45.0 - 2413.17 MPa @Temperature -55.0 - 275 °C |
Flexural Modulus | 4.83 - 159 GPa |
| 6.55002 - 159 GPa @Temperature -55.0 - 177 °C |
Flexural Strain at Break | 1.30 - 4.20 % |
Compressive Yield Strength | 4.14 - 1550 MPa |
| 45.0 - 1520 MPa @Temperature -55.0 - 250 °C |
Compressive Modulus | 2.28 - 152 GPa |
| 124 - 152 GPa @Temperature -55.0 - 177 °C |
Ultimate Bearing Strength | 818.339 - 818.339 MPa @Temperature 70.0 - 70.0 °C |
Bearing Yield Strength | 639.282 - 711.332 MPa @Temperature 70.0 - 90.0 °C |
| 639.282 - 711.332 MPa @Strain 2.00 - 2.00 % |
Poissons Ratio | 0.270 - 0.420 |
| 0.260 - 0.300 @Temperature -55.0 - 177 °C |
Fatigue Strength | 120 - 120 MPa @# of Cycles 1.00e+6 - 1.00e+6 |
| 120 - 120 MPa @Temperature 120 - 120 °C |
Shear Modulus | 3.00 - 5.70 GPa |
| 2.80 - 6.30 GPa @Temperature -55.0 - 177 °C |
Shear Strength | 50.0 - 186 MPa |
| 23.4422 - 206.843 MPa @Temperature -55.0 - 260 °C |
Izod Impact, Notched | 0.180 - 1.07 J/cm |
Izod Impact, Unnotched | 0.800 - 9.08 J/cm |
Izod Impact, Notched (ISO) | 4.30 - 12.0 kJ/m² |
Izod Impact, Unnotched (ISO) | 20.0 - 60.0 kJ/m² |
Charpy Impact Unnotched | 2.30 - 6.55 J/cm² |
| 2.00 - 6.00 J/cm² @Temperature -30.0 - -30.0 °C |
Charpy Impact, Notched | 0.400 - 6.55 J/cm² |
| 0.500 - 0.900 J/cm² @Temperature -30.0 - -30.0 °C |
Falling Dart Impact | 4.40 - 12.5 J |
Instrumented Impact Total Energy | 1.80 - 4.57 J |
Coefficient of Friction | 0.110 - 0.350 |
Coefficient of Friction, Static | 0.260 - 0.320 |
K (wear) Factor | 6.00 - 302 x 10-8 mm³/N-M |
Limiting Pressure Velocity | 0.876 - 13.5 MPa-m/sec |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 0.100 - 3.83e+14 ohm-cm |
Surface Resistance | 50.0 - 1.68e+15 ohm |
Static Decay | 0.100 - 0.500 sec |
Dielectric Constant | 3.30 - 17.0 |
Dielectric Strength | 1.26 - 32.0 kV/mm |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 1.80 - 60.0 µm/m-°C |
| 1.00 - 115 µm/m-°C @Temperature 22.8 - 300 °C |
CTE, linear, Transverse to Flow | 5.00 - 207 µm/m-°C |
| 20.0 - 135 µm/m-°C @Temperature 143 - 300 °C |
Specific Heat Capacity | 0.920 - 1.80 J/g-°C |
| 0.962 - 1.81 J/g-°C @Temperature 50.0 - 200 °C |
Thermal Conductivity | 0.240 - 4.30 W/m-K |
Melting Point | 302 - 385 °C |
Maximum Service Temperature, Air | 225 - 310 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 274 - 350 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 150 - 350 °C |
Deflection Temperature at 8.0 MPa | 175 - 270 °C |
Vicat Softening Point | 295 - 350 °C |
Softening Point | 168 °C |
Heat Distortion Temperature | 235 - 253 °C |
Minimum Service Temperature, Air | -80.0 - -20.0 °C |
Glass Transition Temp, Tg | 143 - 170 °C |
UL RTI, Mechanical with Impact | 180 - 200 °C |
UL RTI, Mechanical without Impact | 240 °C |
Flammability, UL94 | V-0 |
Glow Wire Test | 850 - 960 °C |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 100 - 425 °C |
Nozzle Temperature | 357 - 460 °C |
Melt Temperature | 343 - 470 °C |
Mold Temperature | 135 - 230 °C |
Drying Temperature | 120 - 180 °C |
Moisture Content | 0.0100 - 0.100 % |
Dew Point | -28.9 °C |
Injection Pressure | 82.7 - 124 MPa |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.