(Viewing data as-entered. Click here to return)
|
Physical Properties | Original Value | Comments |
---|
Density | 1.36 g/cc |
Melt Density | 1.20 g/cc @Temperature 270 °C |
Water Absorption | 6.3 % @Thickness 2.00 mm |
Moisture Absorption | 2.10 % @Thickness 2.00 mm |
Viscosity Number | 140 cm³/g |
Linear Mold Shrinkage, Flow | 0.0020 cm/cm |
Linear Mold Shrinkage, Transverse | 0.0060 cm/cm |
|
Mechanical Properties | Original Value | Comments |
---|
Ball Indentation Hardness | 147 MPa |
| 233 MPa |
Tensile Strength at Break | 120 MPa |
| 180 MPa |
Elongation at Break | 3.5 % |
| 6.0 % |
Tensile Modulus | 6000 MPa |
| 10000 MPa |
Flexural Strength | 240 MPa |
Flexural Modulus | 5500 MPa |
| 8500 MPa |
Compressive Strength | 160 MPa |
Poissons Ratio | 0.34 |
| 0.35 |
Shear Strength | 60.0 MPa |
Izod Impact, Notched (ISO) | 11.0 kJ/m² @Temperature -40.0 °C |
| 11.0 kJ/m² @Temperature -30.0 °C |
| 11.0 kJ/m² @Temperature -30.0 °C |
| 15.0 kJ/m² @Temperature 23.0 °C |
| 20.0 kJ/m² @Temperature 23.0 °C |
Izod Impact, Unnotched (ISO) | 90.0 kJ/m² @Temperature -30.0 °C |
| 100 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | 80.0 kJ/m² @Temperature -30.0 °C |
| 80.0 kJ/m² @Temperature -30.0 °C |
| 90.0 kJ/m² @Temperature 23.0 °C |
| 100 kJ/m² @Temperature 23.0 °C |
Charpy Impact, Notched | 11.0 kJ/m² @Temperature -40.0 °C |
| 11.0 kJ/m² @Temperature -30.0 °C |
| 14.0 kJ/m² @Temperature 23.0 °C |
| 21.0 kJ/m² @Temperature -30.0 °C |
| 23.0 kJ/m² @Temperature 23.0 °C |
Tensile Creep Modulus, 1 hour | 5500 MPa |
Tensile Creep Modulus, 1000 hours | 4500 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+14 ohm-cm |
Dielectric Constant | 3.8 @Frequency 100 Hz |
Dissipation Factor | 0.022 @Frequency 100 Hz |
Comparative Tracking Index | 600 V |
| >= 600 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 14.0 µm/m-°C |
| 14.0 µm/m-°C @Temperature 55.0 - 160 °C |
| 26.0 µm/m-°C @Temperature -40.0 - 23.0 °C |
CTE, linear, Transverse to Flow | 102 µm/m-°C |
| 75.0 µm/m-°C @Temperature -40.0 - 23.0 °C |
| 130 µm/m-°C @Temperature 55.0 - 160 °C |
Melting Point | 221 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 220 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 210 °C |
Glass Transition Temp, Tg | 15.0 °C |
| 60.0 °C |
Flammability, UL94 | HB @Thickness 1.50 mm |
| HB @Thickness 3.00 mm |
Flame Spread | 25.0 mm/min @Thickness 1.00 mm |
Oxygen Index | 21 % |
|
Processing Properties | Original Value | Comments |
---|
Melt Temperature | 270 °C |
| 260 - 280 °C |
Mold Temperature | 70.0 - 120 °C |
| 100 °C |
Drying Temperature | 80.0 °C |
Dry Time | 2.00 - 4.00 hour |
Moisture Content | <= 0.20 % |
Hold Pressure | 50.0 - 100 MPa |
|
Descriptive Properties |
---|
Additives | Release agent |
Drying Recommended | yes |
Emission of organic compounds (µgC/g) | 8.5 |
FMVSS Class | B |
Fogging (%) | 95 |
Fogging (mg) | 0.1 |
ISO designation | ISO 16396-PA6,GF30,M1GNR,S14-100 |
Max. screw tangential speed (m/s) | 0.2 |
Odor Class | 3.5 |
Part Marking Code | >PA6-GF30< |
Polymer | PA6-GF30 |
Processing Hold Pressure Time (s/mm) | 3 |
Resin Identification | PA6-GF30 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.