|
Physical Properties | Original Value | Comments |
---|
Density | 1.40 g/cc |
Water Absorption | 0.80 % @Time 86400 sec |
Moisture Absorption at Equilibrium | 1.7 % |
Linear Mold Shrinkage, Flow | 0.0040 cm/cm @Thickness 2.00 mm |
Linear Mold Shrinkage, Transverse | 0.0090 cm/cm @Thickness 2.00 mm |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 145 MPa |
| 205 MPa |
Elongation at Break | 3.0 % |
| 5.0 % |
Tensile Modulus | 7900 MPa |
| 10600 MPa |
Flexural Strength | 200 MPa |
| 290 MPa |
Flexural Modulus | 6500 MPa |
| 10200 MPa |
Poissons Ratio | 0.40 |
Izod Impact, Notched (ISO) | 10.0 kJ/m² @Temperature -40.0 °C |
| 10.0 kJ/m² @Temperature -30.0 °C |
| 11.0 kJ/m² @Temperature -40.0 °C |
| 12.0 kJ/m² @Temperature -30.0 °C |
| 12.0 kJ/m² @Temperature 23.0 °C |
| 16.0 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | 69.0 kJ/m² @Temperature -40.0 °C |
| 71.0 kJ/m² @Temperature -30.0 °C |
| 75.0 kJ/m² @Temperature -40.0 °C |
| 77.0 kJ/m² @Temperature -30.0 °C |
| 86.0 kJ/m² @Temperature 23.0 °C |
| 100 kJ/m² @Temperature 23.0 °C |
Charpy Impact, Notched | 11.0 kJ/m² @Temperature -40.0 °C |
| 11.0 kJ/m² @Temperature -40.0 °C |
| 11.0 kJ/m² @Temperature -30.0 °C |
| 11.0 kJ/m² @Temperature -30.0 °C |
| 13.0 kJ/m² @Temperature 23.0 °C |
| 17.0 kJ/m² @Temperature 23.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+14 ohm-cm @Thickness 1.00 mm |
Dielectric Strength | 20.0 kV/mm @Thickness 1.00 mm |
Arc Resistance | 120 - 180 sec @Thickness 3.00 mm |
Comparative Tracking Index | 600 V @Thickness 3.00 mm |
Hot Wire Ignition, HWI | 7.0 - 15 sec |
| 7.0 - 15 sec |
| 15 - 30 sec |
High Amp Arc Ignition, HAI | >= 120 arcs |
| >= 120 arcs |
| >= 120 arcs |
High Voltage Arc-Tracking Rate, HVTR | 10.0 - 25.4 mm/min |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 21.0 µm/m-°C @Thickness 2.00 mm, Temperature 35.0 - 55.0 °C |
CTE, linear, Transverse to Flow | 106 µm/m-°C @Thickness 2.00 mm, Temperature 23.0 - 55.0 °C |
Melting Point | 260 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 260 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 250 °C |
UL RTI, Electrical | 120 °C @Thickness 0.750 mm |
| 120 °C @Thickness 1.50 mm |
| 120 °C @Thickness 3.00 mm |
UL RTI, Mechanical with Impact | 100 °C @Thickness 0.750 mm |
| 100 °C @Thickness 1.50 mm |
| 105 °C @Thickness 3.00 mm |
UL RTI, Mechanical without Impact | 125 °C @Thickness 0.750 mm |
| 125 °C @Thickness 1.50 mm |
| 125 °C @Thickness 3.00 mm |
Flammability, UL94 | HB @Thickness 0.750 mm |
| HB @Thickness 1.50 mm |
| HB @Thickness 3.00 mm |
Glow Wire Ignition Temperature | 725 °C @Thickness 1.50 mm |
| 750 °C @Thickness 3.00 mm |
| 775 °C @Thickness 0.750 mm |
Glow Wire Flammability Index | 725 °C @Thickness 1.50 mm |
| 750 °C @Thickness 0.750 mm |
| 800 °C @Thickness 3.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Rear Barrel Temperature | 280 - 310 °C |
Middle Barrel Temperature | 280 - 310 °C |
Front Barrel Temperature | 280 - 310 °C |
Nozzle Temperature | 280 - 310 °C |
Melt Temperature | 285 - 305 °C |
Mold Temperature | 65.0 - 95.0 °C |
Drying Temperature | 80.0 °C |
Dry Time | 4.00 hour |
|
Descriptive Properties |
---|
Additive | Lubricant |
Agency Ratings | ASTM, D4066 PA011G35 |
| ASTM, D6779 PA011G35 |
| EC, 1935/2004 |
| EU, 10/2011 |
| EU, 2023/2006 |
| FDA, 21 CFR 177.1500 |
| NSF, STD-51 |
Appearance | Natural Color |
Automotive Material Specification | Chrysler MS-DB-41_CPN 1853 |
Features | Chemical Resistant |
| Corrosion Resistant |
| Good Dimensional Stability |
| Good Electrical Properties |
| Good Flow |
| Good Mold Release |
| High Rigidity |
| High Strength |
| Lubricated |
| Non-Corrosive |
Forms | Pellets |
Processing Method | Injection Molding |
Region | North America, Europe, Asia Pacific |
UL File Number | E70062 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.