|
Physical Properties | Original Value | Comments |
---|
Density | 1.41 g/cc |
Water Absorption | 0.75 % @Temperature 23.0 °C, Time 86400 sec |
Viscosity | 20 cP @Shear Rate 1000 1/s, Temperature 280 °C |
| 20 cP @Shear Rate 1000 1/s, Temperature 290 °C |
| 20 cP @Shear Rate 1000 1/s, Temperature 300 °C |
| 120 cP @Shear Rate 10 1/s, Temperature 300 °C |
| 135 cP @Shear Rate 100 1/s, Temperature 300 °C |
| 140 cP @Shear Rate 100 1/s, Temperature 290 °C |
| 150 cP @Shear Rate 100 1/s, Temperature 280 °C |
| 250 cP @Shear Rate 10 1/s, Temperature 290 °C |
| 300 cP @Shear Rate 10 1/s, Temperature 280 °C |
Linear Mold Shrinkage | 0.0060 cm/cm |
Linear Mold Shrinkage, Flow | 0.0045 cm/cm |
Linear Mold Shrinkage, Transverse | 0.0075 cm/cm |
|
Mechanical Properties | Original Value | Comments |
---|
Tensile Strength at Break | 210 MPa |
Tensile Stress at Strain | 40.0 MPa @Strain 1 %, Temperature 150 °C |
| 45.0 MPa @Strain 1 %, Temperature 120 °C |
| 60.0 MPa @Strain 1 %, Temperature 80.0 °C |
| 65.0 MPa @Strain 2 %, Temperature 150 °C |
| 75.0 MPa @Strain 1 %, Temperature 60.0 °C |
| 75.0 MPa @Strain 2 %, Temperature 120 °C |
| 80.0 MPa @Strain 3 %, Temperature 150 °C |
| 90.0 MPa @Strain 3 %, Temperature 120 °C |
| 90.0 MPa @Strain 4 %, Temperature 150 °C |
| 90.0 MPa @Strain 5.0 %, Temperature 150 °C |
| 95.0 MPa @Strain 2 %, Temperature 80.0 °C |
| 95.0 MPa @Strain 7.0 %, Temperature 150 °C |
| 100 MPa @Strain 1 %, Temperature 23.0 °C |
| 100 MPa @Strain 4 %, Temperature 120 °C |
| 105 MPa @Strain 1 %, Temperature -40.0 °C |
| 105 MPa @Strain 1 %, Temperature 0.000 °C |
| 105 MPa @Strain 5.0 %, Temperature 120 °C |
| 105 MPa @Strain 7.0 %, Temperature 120 °C |
| 110 MPa @Strain 3 %, Temperature 80.0 °C |
| 122 MPa @Strain 2 %, Temperature 60.0 °C |
| 125 MPa @Strain 4 %, Temperature 80.0 °C |
| 125 MPa @Strain 5.0 %, Temperature 80.0 °C |
| 140 MPa @Strain 3 %, Temperature 60.0 °C |
| 150 MPa @Strain 4 %, Temperature 60.0 °C |
| 150 MPa @Strain 5.0 %, Temperature 60.0 °C |
| 155 MPa @Strain 2 %, Temperature 23.0 °C |
| 190 MPa @Strain 3 %, Temperature 23.0 °C |
| 200 MPa @Strain 2 %, Temperature 0.000 °C |
| 210 MPa @Strain 2 %, Temperature -40.0 °C |
Elongation at Break | 3.0 % |
Tensile Modulus | 11400 MPa |
Flexural Strength | 290 MPa |
Flexural Modulus | 9500 MPa |
| 9800 MPa |
Izod Impact, Notched (ISO) | 13.0 kJ/m² |
Charpy Impact Unnotched | 95.0 kJ/m² |
Charpy Impact, Notched | 13.5 kJ/m² |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+15 ohm-cm |
Surface Resistance | 6.00e+14 ohm |
Dielectric Constant | 3.7 |
Dielectric Strength | 34.0 kV/mm |
Dissipation Factor | 0.010 |
Comparative Tracking Index | 600 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 22.0 µm/m-°C @Temperature 23.0 - 85.0 °C |
Melting Point | 263 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 255 °C |
Flammability, UL94 | HB @Thickness 0.800 mm |
| HB @Thickness 1.60 mm |
| HB @Thickness 3.20 mm |
Oxygen Index | 23 % |
|
Processing Properties | Original Value | Comments |
---|
Feed Temperature | 265 - 275 °C |
Mold Temperature | 70.0 - 100 °C |
Drying Temperature | 80.0 °C |
Moisture Content | <= 0.20 % |
|
Descriptive Properties |
---|
Compression Zone | 270-280°C |
Mixing Zone | 280-290°C |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.