|
Physical Properties | Original Value | Comments |
---|
Density | 1.39 g/cc |
Water Absorption | 1.2 % @Time 86400 sec |
| 5.7 % @Thickness 2.00 mm |
Moisture Absorption | 1.80 % @Thickness 2.00 mm |
Viscosity Number | 153 cm³/g |
Linear Mold Shrinkage, Flow | 0.0030 cm/cm |
Linear Mold Shrinkage, Transverse | 0.011 cm/cm |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell M | 101 |
Ball Indentation Hardness | 280 MPa |
Tensile Strength at Break | 140 MPa |
| 200 MPa |
Elongation at Break | 3.5 % |
| 5.0 % |
Tensile Modulus | 8000 MPa |
| 11000 MPa |
Flexural Strength | 200 MPa |
| 290 MPa |
Flexural Modulus | 6000 MPa |
| 9500 MPa |
Poissons Ratio | 0.34 |
| 0.34 |
Izod Impact, Notched (ISO) | 10.0 kJ/m² @Temperature -40.0 °C |
| 10.0 kJ/m² @Temperature -40.0 °C |
| 10.0 kJ/m² @Temperature -30.0 °C |
| 10.0 kJ/m² @Temperature -30.0 °C |
| 12.0 kJ/m² @Temperature 23.0 °C |
| 15.0 kJ/m² @Temperature 23.0 °C |
Izod Impact, Unnotched (ISO) | 70.0 kJ/m² @Temperature -30.0 °C |
| 70.0 kJ/m² @Temperature -30.0 °C |
| 80.0 kJ/m² @Temperature 23.0 °C |
| 90.0 kJ/m² @Temperature 23.0 °C |
Charpy Impact Unnotched | 70.0 kJ/m² @Temperature -30.0 °C |
| 75.0 kJ/m² @Temperature -30.0 °C |
| 85.0 kJ/m² @Temperature 23.0 °C |
| 100 kJ/m² @Temperature 23.0 °C |
Charpy Impact, Notched | 10.0 kJ/m² @Temperature -40.0 °C |
| 10.0 kJ/m² @Temperature -40.0 °C |
| 10.0 kJ/m² @Temperature -30.0 °C |
| 10.0 kJ/m² @Temperature -30.0 °C |
| 13.0 kJ/m² @Temperature 23.0 °C |
| 17.0 kJ/m² @Temperature 23.0 °C |
Tensile Creep Modulus, 1 hour | 8000 MPa |
Tensile Creep Modulus, 1000 hours | 5500 MPa |
|
Electrical Properties | Original Value | Comments |
---|
Volume Resistivity | 1.00e+11 ohm-cm |
| 1.00e+15 ohm-cm |
Surface Resistance | 1.00e+15 ohm |
Dielectric Constant | 4.0 @Frequency 1e+6 Hz |
| 4.2 @Frequency 100 Hz |
Dielectric Strength | 38.0 kV/mm |
| 46.0 kV/mm |
Dissipation Factor | 0.010 @Frequency 100 Hz |
| 0.015 @Frequency 1e+6 Hz |
Comparative Tracking Index | 400 V |
| 400 - 599 V @Thickness 3.00 mm |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear, Parallel to Flow | 18.0 µm/m-°C |
| 13.0 µm/m-°C @Temperature 55.0 - 160 °C |
| 24.0 µm/m-°C @Temperature -40.0 - 23.0 °C |
CTE, linear, Transverse to Flow | 83.0 µm/m-°C |
| 65.0 µm/m-°C @Temperature -40.0 - 23.0 °C |
| 140 µm/m-°C @Temperature 55.0 - 160 °C |
Specific Heat Capacity | 1.33 J/g-°C |
| 2.21 J/g-°C @Temperature 295 °C |
Thermal Conductivity | 0.220 W/m-K @Temperature 295 °C |
Melting Point | 262 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 261 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 252 °C |
Glass Transition Temp, Tg | 20.0 °C |
| 80.0 °C |
Flammability, UL94 | HB @Thickness 0.750 mm |
| HB @Thickness 1.50 mm |
Flame Spread | 28.0 mm/min @Thickness 1.00 mm |
Oxygen Index | 24 % |
Glow Wire Ignition Temperature | 725 °C @Thickness 1.50 mm |
| 750 °C @Thickness 0.750 mm |
| 825 °C @Thickness 3.00 mm |
|
Processing Properties | Original Value | Comments |
---|
Melt Temperature | 295 °C |
| 285 - 305 °C |
Mold Temperature | 70.0 - 120 °C |
| 100 °C |
Ejection Temperature | 210 °C |
Drying Temperature | 80.0 °C |
Dry Time | 2.00 - 4.00 hour |
Moisture Content | <= 0.20 % |
Hold Pressure | 50.0 - 100 MPa |
|
Descriptive Properties |
---|
Additives | Release agent |
Drying Recommended | yes |
Emission of organic compounds (µgC/g) | 6 |
FMVSS Class | SE/B |
Fogging (%) | 95 |
Fogging (mg) | 0.3 |
ISO designation | ISO 16396-PA66,GF33,M1GHNR,S14-110 |
Max. screw tangential speed (m/s) | 0.2 |
Odor Class | 4.5 |
Part Marking Code | >PA66-GF33< |
Polymer | PA66-GF33 |
Processing Hold Pressure Time (s/mm) | 3 |
Resin Identification | PA66-GF33 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.