|
Physical Properties | Original Value | Comments |
---|
Density | 0.00147 - 11.0 g/cc |
Filler Content | 10.0 - 59.0 % |
Water Absorption | 0.0100 - 3.50 % |
| 1.65 - 1.90 % @Temperature 100 - 100 °C |
Moisture Absorption at Equilibrium | 0.000 - 2.00 % |
Water Absorption at Saturation | 0.100 - 3.50 % |
Additive Loading | 2.00 - 30.0 % |
Particle Size | 2.50 - 100 µm |
Specific Surface Area | 1.00 - 9.00 m²/g |
Water Vapor Transmission | 8.00 - 8.07 g/m²/day |
Viscosity Number | 100 - 190 cm³/g |
Thickness | 5.00 - 660 microns |
Linear Mold Shrinkage | 0.000200 - 0.0220 cm/cm |
| 0.00600 - 0.00700 cm/cm @Temperature 80.0 - 80.0 °C |
Linear Mold Shrinkage, Transverse | 0.000500 - 0.0200 cm/cm |
| 0.00700 - 0.00800 cm/cm @Temperature 80.0 - 80.0 °C |
Melt Flow | 0.400 - 190 g/10 min |
|
Mechanical Properties | Original Value | Comments |
---|
Hardness, Rockwell R | 21.0 - 120 |
Hardness, Shore D | 40.0 - 96.0 |
Ball Indentation Hardness | 20.0 - 230 MPa |
Tensile Strength, Ultimate | 12.0 - 1750 MPa |
| 15.0 - 110 MPa @Temperature 60.0 - 150 °C |
Film Tensile Strength at Yield, MD | 35.0 - 35.0 MPa |
Film Tensile Strength at Yield, TD | 35.0 - 35.0 MPa |
Tensile Strength, Yield | 5.50 - 170 MPa |
Film Elongation at Break, MD | 850 % |
Film Elongation at Break, TD | 900 % |
Film Elongation at Yield, MD | 6.00 % |
Film Elongation at Yield, TD | 6.00 % |
Elongation at Break | 0.350 - 588 % |
| 4.50 - 16.0 % @Temperature 60.0 - 150 °C |
Elongation at Yield | 0.900 - 200 % |
| >= 10.0 % @Temperature 60.0 - 150 °C |
Modulus of Elasticity | 0.0400 - 100 GPa |
| 0.259 - 7.20 GPa @Temperature 40.0 - 150 °C |
Tenacity | 0.297 - 0.545 N/tex |
Flexural Yield Strength | 5.45 - 900 MPa |
Flexural Modulus | 0.170 - 95.0 GPa |
| 0.275 - 0.685 GPa @Temperature 60.0 - 120 °C |
Flexural Strain at Break | 2.30 - 10.0 % |
Compressive Yield Strength | 6.00 - 167 MPa |
Compressive Modulus | 1.07 - 6.80 GPa |
Poissons Ratio | 0.350 - 0.430 |
| 0.450 - 0.450 @Temperature 100 - 100 °C |
Izod Impact | 53.0 - 160 J |
Izod Impact, Notched | 0.160 - 100 J/cm |
| 0.210 - 1.10 J/cm @Temperature -40.0 - -20.0 °C |
Izod Impact, Unnotched | 0.0166 J/cm - NB |
Izod Impact, Notched (ISO) | 1.00 - 100000 kJ/m² |
| 4.70 - 19.0 kJ/m² @Temperature -40.0 - -30.0 °C |
Izod Impact, Unnotched (ISO) | 8.00 kJ/m² - NB |
| 18.5 - 90.0 kJ/m² @Temperature -40.0 - -30.0 °C |
Charpy Impact Unnotched | 0.400 J/cm² - NB |
| 2.00 J/cm² - NB @Temperature -40.0 - 0.000 °C |
Charpy Impact, Notched | 0.100 J/cm² - NB |
| 0.100 J/cm² - NB @Temperature -40.0 - 0.000 °C |
Dart Drop, Total Energy | 5.00 - 16.0 J |
Falling Dart Impact | 9.73 - 13.0 J |
Instrumented Impact Total Energy | 3.61 - 21.3 J |
Puncture Energy | 60.0 - 70.0 J @Temperature -30.0 - -30.0 °C |
Coefficient of Friction | 0.0200 - 0.670 |
Coefficient of Friction, Static | 0.140 - 0.520 |
Tensile Creep Modulus, 1 hour | 310 - 1300 MPa |
Tensile Creep Modulus, 1000 hours | 60.0 - 800 MPa |
Tear Strength Test | 0.200 - 143 |
K (wear) Factor | 14.1 - 103 x 10-8 mm³/N-M |
Taber Abrasion, mg/1000 Cycles | 1.00 - 30.0 |
Film Tensile Strength at Break, MD | 80.0 - 80.0 MPa |
Film Tensile Strength at Break, TD | 70.0 - 70.3 MPa |
Hydrostatic Design Basis | 13.7895 - 13.7895 MPa @Temperature 60.0 - 60.0 °C |
|
Electrical Properties | Original Value | Comments |
---|
Electrical Resistivity | 0.00500 - 1.00e+16 ohm-cm |
Surface Resistance | 10.0 - 2.00e+16 ohm |
Insulation Resistance | 10.0 - 1.00e+9 ohm |
Static Decay | 0.00200 - 2.00 sec |
Dielectric Constant | 2.00 - 17.0 |
Dielectric Strength | 1.00 - 100 kV/mm |
Dissipation Factor | 0.000304 - 0.330 |
Dielectric Loss Index | 0.000200 - 0.0400 |
Comparative Tracking Index | 60.0 - 600 V |
|
Thermal Properties | Original Value | Comments |
---|
CTE, linear | 0.300 - 414 µm/m-°C |
| 25.0 - 295 µm/m-°C @Temperature -50.0 - 150 °C |
CTE, linear, Transverse to Flow | 3.00 - 216 µm/m-°C |
| 84.0 - 300 µm/m-°C @Temperature 40.0 - 100 °C |
Specific Heat Capacity | 1.38 - 2.50 J/g-°C |
| 1.68 - 2.85 J/g-°C @Temperature 50.0 - 150 °C |
Thermal Conductivity | 0.140 - 37.0 W/m-K |
Melting Point | 130 - 220 °C |
Maximum Service Temperature, Air | 70.0 - 170 °C |
Deflection Temperature at 0.46 MPa (66 psi) | 45.0 - 193 °C |
Deflection Temperature at 1.8 MPa (264 psi) | 35.0 - 200 °C |
Deflection Temperature at 8.0 MPa | 40.0 - 175 °C |
Vicat Softening Point | 60.0 - 210 °C |
Minimum Service Temperature, Air | -100 - 110 °C |
Glass Transition Temp, Tg | -60.0 - 170 °C |
Decomposition Temperature | 222 - 227 °C |
UL RTI, Electrical | 65.0 - 120 °C |
UL RTI, Mechanical with Impact | 65.0 - 85.0 °C |
UL RTI, Mechanical without Impact | 65.0 - 95.0 °C |
Flammability, UL94 | HB - V-0 |
Oxygen Index | 21.0 - 30.0 % |
Glow Wire Test | 650 - 960 °C |
|
Optical Properties | Original Value | Comments |
---|
Gloss | 150 % |
Transmission, Visible | 80.0 - 90.0 % |
|
Processing Properties | Original Value | Comments |
---|
Processing Temperature | 80.0 - 266 °C |
Nozzle Temperature | 240 - 270 °C |
Die Temperature | 160 - 230 °C |
Melt Temperature | 170 - 300 °C |
Mold Temperature | 30.0 - 149 °C |
Injection Velocity | 30.0 - 100 mm/sec |
Die Opening | 0.0400 cm |
Roll Temperature | 50.0 °C |
Drying Temperature | 54.4 - 130 °C |
Moisture Content | 0.0200 - 0.200 % |
Dew Point | -40.0 °C |
Injection Pressure | 30.0 - 103 MPa |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to go back to viewing the property data in MatWeb's normal format.