|
Physical Properties | Metric | English | Comments |
---|
Density | 1.45 - 1.99 g/cc | 0.0524 - 0.0719 lb/in³ |
| 1.10 - 1.10 g/cc @Temperature 325 - 325 °C | 0.0397 - 0.0397 lb/in³ @Temperature 617 - 617 °F |
Filler Content | 45.0 - 50.0 % | 45.0 - 50.0 % |
Water Absorption | 0.0200 - 4.00 % | 0.0200 - 4.00 % |
Moisture Absorption at Equilibrium | 0.200 - 2.00 % | 0.200 - 2.00 % |
| 0.850 - 0.950 % @Temperature 70.0 - 70.0 °C | 0.850 - 0.950 % @Temperature 158 - 158 °F |
Water Absorption at Saturation | 2.50 - 4.30 % | 2.50 - 4.30 % |
Linear Mold Shrinkage | 0.000100 - 0.00600 cm/cm | 0.000100 - 0.00600 in/in |
Linear Mold Shrinkage, Transverse | 0.00100 - 0.0100 cm/cm | 0.00100 - 0.0100 in/in |
|
Mechanical Properties | Metric | English | Comments |
---|
Hardness, Rockwell R | 124 - 126 | 124 - 126 |
Ball Indentation Hardness | 340 - 360 MPa | 49300 - 52200 psi |
Tensile Strength, Ultimate | 70.0 - 295 MPa | 10200 - 42800 psi |
| 42.0 - 340 MPa @Temperature -40.0 - 250 °C | 6090 - 49300 psi @Temperature -40.0 - 482 °F |
Tensile Strength, Yield | 24.8 - 260 MPa | 3600 - 37700 psi |
Elongation at Break | 0.600 - 3.20 % | 0.600 - 3.20 % |
| 1.60 - 10.0 % @Temperature -40.0 - 200 °C | 1.60 - 10.0 % @Temperature -40.0 - 392 °F |
Modulus of Elasticity | 10.3 - 22.1 GPa | 1490 - 3200 ksi |
| 1.10 - 19.0 GPa @Temperature -40.0 - 200 °C | 160 - 2760 ksi @Temperature -40.0 - 392 °F |
Flexural Yield Strength | 177 - 440 MPa | 25700 - 63800 psi |
| 94.5 - 267 MPa @Temperature 100 - 175 °C | 13700 - 38700 psi @Temperature 212 - 347 °F |
Flexural Modulus | 10.4 - 21.0 GPa | 1510 - 3040 ksi |
| 4.70 - 16.7 GPa @Temperature 100 - 200 °C | 682 - 2420 ksi @Temperature 212 - 392 °F |
Flexural Strain at Break | 2.30 - 3.00 % | 2.30 - 3.00 % |
Compressive Yield Strength | 168 - 314 MPa | 24400 - 45500 psi |
Poissons Ratio | 0.330 - 0.410 | 0.330 - 0.410 |
Fatigue Strength | 100 - 100 MPa @# of Cycles 1580 - 1580 | 14500 - 14500 psi @# of Cycles 1580 - 1580 |
| 100 - 100 MPa @Temperature 140 - 140 °C | 14500 - 14500 psi @Temperature 284 - 284 °F |
Shear Modulus | 0.350 - 4.00 GPa @Temperature 0.000 - 350 °C | 50.8 - 580 ksi @Temperature 32.0 - 662 °F |
Shear Strength | 89.6 - 108 MPa | 13000 - 15700 psi |
Izod Impact, Notched | 0.590 - 4.97 J/cm | 1.11 - 9.30 ft-lb/in |
Izod Impact, Unnotched | 3.86 - 13.0 J/cm | 7.23 - 24.4 ft-lb/in |
Izod Impact, Notched (ISO) | 7.80 - 17.0 kJ/m² | 3.71 - 8.09 ft-lb/in² |
| 11.0 - 13.5 kJ/m² @Temperature -40.0 - -20.0 °C | 5.23 - 6.42 ft-lb/in² @Temperature -40.0 - -4.00 °F |
Izod Impact, Unnotched (ISO) | 42.0 - 87.0 kJ/m² | 20.0 - 41.4 ft-lb/in² |
| 50.0 - 69.0 kJ/m² @Temperature -30.0 - -30.0 °C | 23.8 - 32.8 ft-lb/in² @Temperature -22.0 - -22.0 °F |
Charpy Impact Unnotched | 1.00 - 11.0 J/cm² | 4.76 - 52.4 ft-lb/in² |
| 1.40 - 9.00 J/cm² @Temperature -40.0 - -30.0 °C | 6.66 - 42.8 ft-lb/in² @Temperature -40.0 - -22.0 °F |
Charpy Impact, Notched | 0.200 - 9.00 J/cm² | 0.952 - 42.8 ft-lb/in² |
| 0.800 - 7.00 J/cm² @Temperature -40.0 - -30.0 °C | 3.81 - 33.3 ft-lb/in² @Temperature -40.0 - -22.0 °F |
|
Electrical Properties | Metric | English | Comments |
---|
Electrical Resistivity | 1.00e+11 - 1.00e+17 ohm-cm | 1.00e+11 - 1.00e+17 ohm-cm |
Surface Resistance | 1.00e+12 - 8.10e+16 ohm | 1.00e+12 - 8.10e+16 ohm |
Dielectric Constant | 3.70 - 6.10 | 3.70 - 6.10 |
Dielectric Strength | 16.0 - 43.0 kV/mm | 406 - 1090 kV/in |
Dissipation Factor | 0.00400 - 0.0500 | 0.00400 - 0.0500 |
Arc Resistance | 145 - 300 sec | 145 - 300 sec |
Comparative Tracking Index | 325 - 600 V | 325 - 600 V |
Hot Wire Ignition, HWI | 120 - 150 sec | 120 - 150 sec |
High Amp Arc Ignition, HAI | 60.0 - 119 arcs | 60.0 - 119 arcs |
High Voltage Arc-Tracking Rate, HVTR | 4.00 - 16.0 mm/min | 0.157 - 0.630 in/min |
|
Thermal Properties | Metric | English | Comments |
---|
CTE, linear | 12.0 - 50.0 µm/m-°C | 6.67 - 27.8 µin/in-°F |
| 6.00 - 35.0 µm/m-°C @Temperature -40.0 - 249 °C | 3.33 - 19.4 µin/in-°F @Temperature -40.0 - 480 °F |
CTE, linear, Transverse to Flow | 40.0 - 66.0 µm/m-°C | 22.2 - 36.7 µin/in-°F |
| 46.0 - 150 µm/m-°C @Temperature -40.0 - 249 °C | 25.6 - 83.3 µin/in-°F @Temperature -40.0 - 480 °F |
Thermal Conductivity | 0.350 - 1.20 W/m-K | 2.43 - 8.33 BTU-in/hr-ft²-°F |
| 0.240 - 0.240 W/m-K @Temperature 325 - 325 °C | 1.67 - 1.67 BTU-in/hr-ft²-°F @Temperature 617 - 617 °F |
Melting Point | 260 - 335 °C | 500 - 635 °F |
Maximum Service Temperature, Air | 120 - 270 °C | 248 - 518 °F |
Deflection Temperature at 0.46 MPa (66 psi) | 120 - 310 °C | 248 - 590 °F |
Deflection Temperature at 1.8 MPa (264 psi) | 90.0 - 320 °C | 194 - 608 °F |
Deflection Temperature at 8.0 MPa | 105 - 250 °C | 221 - 482 °F |
Vicat Softening Point | 100 - 313 °C | 212 - 595 °F |
Glass Transition Temp, Tg | 45.0 - 144 °C | 113 - 291 °F |
UL RTI, Electrical | 85.0 - 140 °C | 185 - 284 °F |
Flammability, UL94 | HB - V-0 | HB - V-0 |
Flame Spread | 25.0 - 80.0 mm/min | 0.984 - 3.15 in/min |
Oxygen Index | 23.0 - 27.0 % | 23.0 - 27.0 % |
Glow Wire Test | 700 - 960 °C | 1290 - 1760 °F |
|
Processing Properties | Metric | English | Comments |
---|
Processing Temperature | 296 - 345 °C | 565 - 653 °F |
Nozzle Temperature | 320 - 345 °C | 608 - 653 °F |
Melt Temperature | 270 - 360 °C | 518 - 680 °F |
Mold Temperature | 65.6 - 180 °C | 150 - 356 °F |
Drying Temperature | 80.0 - 130 °C | 176 - 266 °F |
Moisture Content | 0.0300 - 0.200 % | 0.0300 - 0.200 % |
Dew Point | -31.7 - -28.9 °C | -25.0 - -20.0 °F |
Injection Pressure | 41.4 - 124 MPa | 6000 - 18000 psi |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb's
terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.